-40%
UHPPOTE AC100-240V to 12V/5A Power Supply Support Backup Battery for Door...
$ 15.54
- Description
- Size Guide
Description
UHPPOTE AC100-240V to 12V/5A Power Supply Support Backup Battery for Door Access Control SystemProduct Details
Manufacturer: UHPPOTE
Part Number: UT-208K
Item Weight: 7 ounces
Package Dimensions: 6.7 x 3.2 x 2.1 inches
Country of Origin: China
Item model number: UT-208K
Is Discontinued By Manufacturer: No
Power Source: Battery powered, Dc
Voltage: 12 Volts
Item Package Quantity: 1
Batteries Included?: No
Batteries Required?: No
AC100-240V Worldwide voltage input, DC12V/5A stable output
Support 12V/7A backup battery input, for emergency power supply when power off
Set NC/NO outputs, can control various types of electric locks
0-15s lock time delay setting
Suitable for building intercom, various entrances access control, particularly suitable for all kinds of electric locks
Features: Set NC/NO outputs, can control various types of electric locksBased relay control circuit, lock time can be adjusted with 0-15 seconds (Tips: Opening time must set to 0 second when connecting with electric controlled lock. Otherwise electric bolt lock would be Burned Down.)Automatic protection function for dangerous situation: overload / over voltage / short circuitBuilt-in remote module interface, remote control module can be inserted directly, in order to remote keyless entry for access control systemSupport external backpack battery 12V 7AH (Not included)Good isolation, high and low voltage 1500VAC/1 minutes without breakdown.A short circuit (flow) protection (output circuit is short circuit will automatically disconnect. When troubleshooting will automatically return to normal.) Overheating,over-voltage protection.Battery clarity reverse protection (when the batter is connected backwards, the power will not be damaged. At this point, the battery is positive or negative adjustment, the battery power, recovery is about 20 seconds.)The Charging no-load voltage is 16.5V, and the charging voltage is 13.8V when the battery is connected. The 12V/7AH battery is fully charged for 18-discharge protection of the battery (when the battery voltage is lower than 9.2V in the process of using the battery, the battery will be automatically disconnected to protect the data loss of the access control device and the quick charging of the battery when it calls).There is a battery start button B which is convenient for battery installation and test when AC220V is not connected.